• |
  • 企业荣誉

  • 首页 > 产品中心 > 制药灌装生产联动线

    NFYYS10-20型眼药水、电子烟油灌装联动线

  • 产品详情Product Details


    用途与简介/ Brief Introduction:

    本生产线由全自动理瓶机、滚筒式洗瓶机、灭菌干燥机、眼药水灌装旋盖机、立式贴标机组成,可完成理瓶、水、气的清洗、烘干及臭氧消毒、灌装、加塞、旋盖、贴标等工序,主要用于眼药水及其他小剂量溶液的联线生产,也可单机独立使用。符合GMP要求。

    This production line consist of  Automatic Bottle Unscrambler,  Bottle Washing Machine, Tunnel Type Sterilization Drier, eyedrop filling machine, Vertical Labeling machine, can complete bottle sorting, water,and gas cleaning, drying and ozone disinfection, filling, plugging, capping, labeling, mainly used in eyedrops and other small doses of solution, also can be used single independently.  Meet the GMP requirement.

    特点/Characteristic:

    本机组设计结构合理,运行稳定、灌装精度高。符合GMP标准。    

    眼药水灌装旋盖机已是我公司的第三代产品,人机界面控制,蠕动泵灌装,由真空吸机械手代替气缸更好的打塞,保证了稳定性和合格率。采用恒扭矩旋盖,具有无瓶不灌装、无塞不上盖,无瓶无塞可自动停机的功能。   

    It with reasonable structure, higher precision in filling, reaching the advanced level in domestic same business. Meet with requirement of GMP standard completely.

    eyedrop filling capping machine is a third generation product, human-machine interface operation, filling by peristaltic pump, replace air cylinder with vacuum drived manipulator for plugging, aquire higherstability and percent of pass. Constant torquecap screwing. No bottle no filling, no plug no capping and automatically stop if cap and plug is under-supply.  

    技术参数/technical parameters:

    适用规格/Bottle size

    10-20ml

    生产能力/Capacity

    低:40-60/  中:70-120/

    40-60/  70-120 bottles/min

    用水压力/ Hydraulic Pressure Mpa

    0.3Mpa

    用水量 /water consumption

    0.5 m3/h

    洁净压缩空气压力 /Clean compressed air pressure

    0.6-0.8Mpa

    洁净压缩空气用量/Clean compressed air consumption

    300 L/min

    电源/Voltage

    380V/50Hz

    功率/Power

    5.5 kw

    生产线总长/Dimension

    11000*1500*1900mm




  • 18202134005

  • shnafeng126@.com

  • 上海纳丰机械设备有限公司

  • 展开